
產品描述
1、造成汽車油箱鎖不住的原因可能是汽車油箱蓋變形了,在關閉油箱蓋時卡到了,油箱蓋沒有對準鎖眼,然后強行關閉,導致油箱蓋嚴重變形,最后只能更換一個新的油箱蓋。
2、也有可能是鎖止機構損壞了,需要重新更換鎖止機構。
3、還有一些汽車的油箱蓋內部使用的是電子解鎖裝置,相當于電磁閥的工作原理,該工作原理也會出現油箱外蓋鎖不了的情況可能是油箱蓋電子鎖的供電線束出現問題,因?yàn)殡娮渔i內部結構是處于后輪內襯里面,車輪涉水后,線束連接器就受到污水和灰塵的腐蝕,影響開關,當線束存在問題時要及時處理。
免責聲明丨 部分內容來源網絡!本文僅供交流學習 , 版權歸屬原作者,部分圖片、內容推送時未能及時與原作者取得聯系,若來源標注錯誤或侵犯到您的權益煩請告知,我們將立即刪除.
企業介紹
公司供應攤鋪機配件,壓路機配件,銑刨機配件,攤鋪機刮板驅動軸,刮板驅動軸總成,找平儀,找平儀支架以及液壓泵和配件。還供應攤鋪機易損件,攤鋪機平衡梁,攪龍軸,踏板,輸料底板,葉片,熨平板,減速機,鏈軌,履帶板,支重輪,刮板大鏈條,輸料鏈條等。
聯系人:梁經理
聯系方式:13645201509(微信同號)
QQ:2870202745
QQ郵箱:2870202745@qq.com
網易郵箱:LS13645201509@163.com
WhatsApp:+86 13645201509
1. The reason why the car fuel tank cannot be locked may be that the car fuel tank cap is deformed and got stuck when closing it. The fuel tank cap was not aligned with the lock hole and was forcibly closed, resulting in severe deformation of the fuel tank cap. In the end, a new fuel tank cap had to be replaced.
2. It is also possible that the locking mechanism is damaged and needs to be replaced.
3. Some cars also use an electronic unlocking device inside the fuel tank cap, which is equivalent to the working principle of a solenoid valve. This working principle may also result in the inability to lock the outer cover of the fuel tank. This may be due to a problem with the power supply harness of the electronic lock of the fuel tank cap, as the internal structure of the electronic lock is located inside the rear wheel lining. When the wheel is submerged in water, the harness connector is corroded by sewage and dust, affecting the switch. When there is a problem with the harness, it should be dealt with in a timely manner.
Disclaimer | Some content is sourced from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source annotation is incorrect or infringes on your rights, please inform us and we will immediately delete it
Company Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, including balance beams, agitator shafts, pedals, feeding base plates, blades, ironing plates, reducers, chain rails, track plates, support wheels, scraper chains, and feeding chains.
Contact: Manager Liang
Contact information: 13645201509 (same WeChat account)
QQ:2870202745
QQ email: 2870202745@qq.com
NetEase email: LS13645201509@163.com
WhatsApp:+86 13645201509
您的專屬咨詢顧問:張經理
詳細地址:徐州市泉山區段莊街道礦山路百合嘉園2棟303室
備案號1:蘇ICP備16030684號-19



