您的專屬咨詢顧問：張經理
詳細地址：徐州市泉山區段莊街道礦山路百合嘉園2棟303室
備案號1：蘇ICP備16030684號-19
產品描述
根據輸入物理量可分為:位移傳感器、壓力傳感器、速度傳感器、溫度傳感器及氣敏傳感器等。
根據工作原理可分為:電阻式、電感式、電容式及電勢式等。
根據輸出信號的性質可分為:模擬式傳感器和數字式傳感器。即模擬式傳感器輸出模擬信號，數字式傳感器輸出數字信號
根據能量轉換原理可分為:有源傳感器和無源傳感器。有源傳感器將非電量轉換為電能量，如電動勢、電荷式傳感器等;無源程序傳感器不起能量轉換作用，只是將被測非電量轉換為電參數的量，如電阻式、電感式及電容光煥發式傳感器等
免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.
企業介紹
公司供應攤鋪機配件，壓路機配件，銑刨機配件，攤鋪機刮板驅動軸，刮板驅動軸總成，找平儀，找平儀支架以及液壓泵和配件。我廠還供應攤鋪機易損件，攤鋪機平衡梁，攪龍軸，踏板，輸料底板，葉片，熨平板，減速機，鏈軌，履帶板，支重輪，刮板大鏈條，輸料鏈條等。
聯系人：梁經理
聯系方式：13645201509（微信同號）
QQ：2870202745
According to the input physical quantities, it can be divided into displacement sensors, pressure sensors, speed sensors, temperature sensors, and gas sensors.
According to the working principle, it can be divided into resistance type, inductance type, capacitance type, and potential type.
According to the properties of the output signal, it can be divided into analog sensors and digital sensors. Analog sensors output analog signals, while digital sensors output digital signals
According to the principle of energy conversion, it can be divided into active sensors and passive sensors. Active sensors convert non electrical quantities into electrical energy, such as electromotive force, charge based sensors, etc; Passive program sensors do not have an energy conversion effect, but only convert the measured non electrical quantity into electrical parameters, such as resistive, inductive, and capacitive glow sensors
Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it
Enterprise Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of paver, balance beam of paver, auger shaft, pedal, conveying bottom plate, blade, screed, reducer, chain rail, track plate, supporting wheel, scraper large chain, conveying chain, etc.
Contact person: Manager Liang
Contact information: 13645201509 (same WeChat account)
QQ：2870202745
您的專屬咨詢顧問：張經理
詳細地址：徐州市泉山區段莊街道礦山路百合嘉園2棟303室
備案號1：蘇ICP備16030684號-19